Copper Aluminum Continuous Extruding Production Line
This production line is composed of pay-off stand for copper rods,straightener,continuous extruder,oxidation preventive cooling system,spooling machine and electrical controlling unit.Use pure copper rod without oxygen produced with pulling method as stock,different kinds of copper alloy rod can be used also.Copper rod cleaning system can not be used when the surface of the copper rod is clean.The stock wire is first given out from pay-off stand,then straightened and sent to the continuous extrusion host machine for extruding.Wire product form after extruding,then pass through oxidation preventive equipment and cooling system,the last step is wrap-up or length fixed cutting after measured by meter counter and other equipment.
Features:
1.Use pure copper with same specification as raw material,different kinds of copper alloy can also be used.It's convenient to prepare the material.
2.Annealing is not required as extrudng process cause thermal Deformation.The equipmen thas remarkable energy saving character and good uniform feature
3.The production methodology is simple because die arrangement is not required as one mold form the shape directly.It's convenient to change the mold.
4.With accurate dimensions and fine finish,our products possess very good mechanical property and electric conduction property.
5.It's especially suitable for mass varieties and small batches production because the production process is fast and convenient.You need only change one mold when changing theproduct.
6.With compact structure,the equipment occupies less land.The equipment as well as the factory building cost little investment,and the operating cost is small.
7.With lower labor intensity,the equipment need lessoperators and have the characters of energy saving,environment protection and less methodology loss
| TypeTBJ300 |
Copper |
Aluminum |
| Nominal diameter of extrusion wheel(mm) |
300 |
300 |
| Power of main motor(kw) |
DC90KW or Servo motor 90KW |
DC110KW or Servo motor 110KW |
| Rotating speed of extruder(rpm) |
4~12.5 |
4~18 |
| Type of material |
no oxygen up-casting copper rod |
Aluminum rod |
| Diameter of wire rod(mm) |
φ12.5+0.2 |
φ9.5or φ12 |
| Maximum width of the product(mm) |
50 |
40 |
| Sectional area of the product(mm²) |
5~300 |
5~200 |
| Flakiness ratio of finished product |
≤15:1 |
≤15:1 |
| Average productivity(kg/h) |
350~450 |
150~200 |
| Overflow rate(%) |
1~3 |
1~3 |
FAQ
1.Q: What are your main products?
A: We offer professional transformer accessories and insulation materials with 15 years of experience.
2.Q Why do you choose us?
A: With a lot of experience in our field. Our engineering team offers high-value design guidance for
Ensure product performance and efficiency. And our strict adherence to rigorous tolerance and quality control standards lead to easier assembly of finished components at your facility. We always focus on Quality.
3. Q: How can you control your quality?
A: For each production process, we have a complete quality control system for chemical composition, physical and electrical properties. After production, all products will be tested according to related standards, and factory test reports will be sent along with shipping documents. .
4. Q: Does your company accept customization?
A. Yes, we can accept OEM/ODM.
5.Q: Do you have the products in stock?
A: It depends on your request, we have standard models in stock. Special new products and large orders will be produced according to your order.
6. Q: What are your payment terms?
A: Normally we accept all kinds of payment terms, T/T, L/C, Western union, cash.
7. Q: What do you have for the certificate?
A: Quality Service Credit Certificate, Enterprise Credit Degree Certificate, Credit Operation Demonstration Unit Certificate, Quality Management System Certificate, etc.
8.Q: Can we visit your company?
A: Yes, of course, you are welcome to visit our company.
Thank you for reading, click here to consult more product information
){kind=link}